Skip to content

filecoin-project/lotus

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Project Lotus Logo

Project Lotus - 莲


Lotus is an implementation of the Filecoin Distributed Storage Network. For more details about Filecoin, check out the Filecoin Spec.

Building & Documentation

Note

The default master branch is the dev branch, please use with caution. For the latest stable version, checkout the latest release.

For complete instructions on how to build, install and setup lotus, please visit https://lotus.filecoin.io. Basic build instructions can be found further down in this readme.

Reporting a Vulnerability

Please send an email to [email protected]. See our security policy for more details.

Related packages

These repos are independent and reusable modules, but are tightly integrated into Lotus to make up a fully featured Filecoin implementation:

Contributing

We welcome contributions to Lotus! Please see our Contributing Guide for more details on how to get started.

Basic Build Instructions

System-specific Software Dependencies:

Building Lotus requires some system dependencies, usually provided by your distribution.

Ubuntu/Debian:

sudo apt install mesa-opencl-icd ocl-icd-opencl-dev gcc git bzr jq pkg-config curl clang build-essential hwloc libhwloc-dev wget -y && sudo apt upgrade -y

Fedora:

sudo dnf -y install gcc make git bzr jq pkgconfig mesa-libOpenCL mesa-libOpenCL-devel opencl-headers ocl-icd ocl-icd-devel clang llvm wget hwloc hwloc-devel

For other distributions you can find the required dependencies here. For instructions specific to macOS, you can find them here.

Go

To build Lotus, you need a working installation of Go 1.22.7 or higher:

wget -c https://golang.org/dl/go1.22.7.linux-amd64.tar.gz -O - | sudo tar -xz -C /usr/local

TIP: You'll need to add /usr/local/go/bin to your path. For most Linux distributions you can run something like:

echo "export PATH=$PATH:/usr/local/go/bin" >> ~/.bashrc && source ~/.bashrc

See the official Golang installation instructions if you get stuck.

Build and install Lotus

Once all the dependencies are installed, you can build and install the Lotus suite (lotus, lotus-miner, and lotus-worker).

  1. Clone the repository:

    git clone https://github.com/filecoin-project/lotus.git
    cd lotus/

Note: The default branch master is the dev branch where the latest new features, bug fixes and improvement are in. However, if you want to run lotus on Filecoin mainnet and want to run a production-ready lotus, get the latest release.

  1. To join mainnet, checkout the latest release.

    If you are changing networks from a previous Lotus installation or there has been a network reset, read the Switch networks guide before proceeding.

    For networks other than mainnet, look up the current branch or tag/commit for the network you want to join in the Filecoin networks dashboard, then build Lotus for your specific network below.

    git checkout <tag_or_branch>
    # For example:
    git checkout <vX.X.X> # tag for a release

    Currently, the latest code on the master branch corresponds to mainnet.

  2. If you are in China, see "Lotus: tips when running in China".

  3. This build instruction uses the prebuilt proofs binaries. If you want to build the proof binaries from source check the complete instructions. Note, if you are building the proof binaries from source, installing rustup is also needed.

  4. Build and install Lotus:

    make clean all #mainnet
    
    # Or to join a testnet or devnet:
    make clean calibnet # Calibration with min 32GiB sectors
    
    sudo make install

    This will put lotus, lotus-miner and lotus-worker in /usr/local/bin.

    lotus will use the $HOME/.lotus folder by default for storage (configuration, chain data, wallets, etc). See advanced options for information on how to customize the Lotus folder.

  5. You should now have Lotus installed. You can now start the Lotus daemon and sync the chain.

  6. (Optional) Follow the Setting Up Prometheus and Grafana guide for detailed instructions on setting up a working monitoring system running against a local running lotus node.

License

Dual-licensed under MIT + Apache 2.0