Cannot read zero-offset triangles #15

rsmacleod · 2015-07-20T18:02:45Z

I just tried reading a .mat file that uses 0 base for pointing at nodes:

[airtable:~/Dropbox/IBBM2015/Data/ischemia_vis/geom]$ map3d -f rsm-13-10-03-sock_geometry.mat
Reading geom file rsm-13-10-03-sock_geometry.mat, surface# 1
*** In CheckPointValidity error in element #447 of length 3
The point #3 = 0 is zero or less
MAP3D WARNING: Unable to read geometry file "rsm-13-10-03-sock_geometry.mat".

I thought map3d was smart enough now to read 0-offset files?

bryanworthen · 2015-07-21T16:40:34Z

I think when we talked about this last time, we specifically went through fac files. I can make mat files work, pretty easily. If you send me the mat file, I can do that. Sorry if this set you back at all.

Thanks,
Bryan

On Jul 20, 2015, at 12:02 PM, Rob MacLeod [email protected] wrote:

I just tried reading a .mat file that uses 0 base for pointing at nodes:

[airtable:~/Dropbox/IBBM2015/Data/ischemia_vis/geom]$ map3d -f rsm-13-10-03-sock_geometry.mat
Reading geom file rsm-13-10-03-sock_geometry.mat, surface# 1
*** In CheckPointValidity error in element #447 of length 3
The point #3 = 0 is zero or less
MAP3D WARNING: Unable to read geometry file "rsm-13-10-03-sock_geometry.mat".

I thought map3d was smart enough now to read 0-offset files?

—
Reply to this email directly or view it on GitHub.

rsmacleod · 2015-07-21T21:47:35Z

Hi Byran,
Thanks, I can send you the file...but I cannot see how to attach a file (other than an image) to this message. Do you know how to do this?
Thanks,
Rob

bryanworthen · 2015-07-22T00:25:48Z

Can you mail it to me directly? (That does kind of bug me about github.) Or is it too big?

Thanks,
Bryan

On Jul 21, 2015, at 3:47 PM, Rob MacLeod [email protected] wrote:

Hi Byran,
Thanks, I can send you the file...but I cannot see how to attach a file (other than an image) to this message. Do you know how to do this?
Thanks,
Rob

—
Reply to this email directly or view it on GitHub.

bryanworthen · 2015-07-22T00:26:47Z

If not, I'll try to make one on a sci machine. If shell doesn't have one, I'll need you to tell me a machine to access.

Thanks,
Bryan

On Jul 21, 2015, at 3:47 PM, Rob MacLeod [email protected] wrote:

Hi Byran,
Thanks, I can send you the file...but I cannot see how to attach a file (other than an image) to this message. Do you know how to do this?
Thanks,
Rob

—
Reply to this email directly or view it on GitHub.

rsmacleod · 2015-07-22T01:32:37Z

HI Bryan,

DID you get the email I sent earlier with the file? It was to your gmail address.

Cheers,
Rob

On Jul 21, 2015, at 18:25 , bryanworthen [email protected] wrote:

Can you mail it to me directly? (That does kind of bug me about github.) Or is it too big?

Thanks,
Bryan

On Jul 21, 2015, at 3:47 PM, Rob MacLeod [email protected] wrote:

Hi Byran,
Thanks, I can send you the file...but I cannot see how to attach a file (other than an image) to this message. Do you know how to do this?
Thanks,
Rob

—
Reply to this email directly or view it on GitHub.

—
Reply to this email directly or view it on GitHub.

bryanworthen · 2015-07-22T12:26:26Z

Yes, thanks.

I should be done by Friday evening (I'm on a work trip that's taking nor effort than expected).

Bryan

On Jul 21, 2015, at 7:32 PM, Rob MacLeod [email protected] wrote:

HI Bryan,

DID you get the email I sent earlier with the file? It was to your gmail address.

Cheers,
Rob

On Jul 21, 2015, at 18:25 , bryanworthen [email protected] wrote:

Can you mail it to me directly? (That does kind of bug me about github.) Or is it too big?

Thanks,
Bryan

On Jul 21, 2015, at 3:47 PM, Rob MacLeod [email protected] wrote:

Hi Byran,
Thanks, I can send you the file...but I cannot see how to attach a file (other than an image) to this message. Do you know how to do this?
Thanks,
Rob

—
Reply to this email directly or view it on GitHub.

—
Reply to this email directly or view it on GitHub.

—
Reply to this email directly or view it on GitHub.

rsmacleod · 2015-07-22T12:55:32Z

HI Bryan,

No problem!

Cheers,
Rob

On Jul 22, 2015, at 06:26 , bryanworthen [email protected] wrote:

Yes, thanks.

I should be done by Friday evening (I'm on a work trip that's taking nor effort than expected).

Bryan

On Jul 21, 2015, at 7:32 PM, Rob MacLeod [email protected] wrote:

HI Bryan,

DID you get the email I sent earlier with the file? It was to your gmail address.

Cheers,
Rob

On Jul 21, 2015, at 18:25 , bryanworthen [email protected] wrote:

Can you mail it to me directly? (That does kind of bug me about github.) Or is it too big?

Thanks,
Bryan

On Jul 21, 2015, at 3:47 PM, Rob MacLeod [email protected] wrote:

Hi Byran,
Thanks, I can send you the file...but I cannot see how to attach a file (other than an image) to this message. Do you know how to do this?
Thanks,
Rob

—
Reply to this email directly or view it on GitHub.

—
Reply to this email directly or view it on GitHub.

—
Reply to this email directly or view it on GitHub.

—
Reply to this email directly or view it on GitHub.

bryanworthen · 2015-07-31T06:09:10Z

Hi Rob,

Sorry for the delay. I had to reinstall my development environment, and I
couldn't get to that until today.

Bryan

On Wed, Jul 22, 2015 at 6:55 AM, Rob MacLeod [email protected]
wrote:

HI Bryan,

No problem!

Cheers,
Rob

On Jul 22, 2015, at 06:26 , bryanworthen [email protected] wrote:

Yes, thanks.

I should be done by Friday evening (I'm on a work trip that's taking nor
effort than expected).

Bryan

On Jul 21, 2015, at 7:32 PM, Rob MacLeod [email protected]
wrote:

HI Bryan,

DID you get the email I sent earlier with the file? It was to your
gmail address.

Cheers,
Rob

On Jul 21, 2015, at 18:25 , bryanworthen [email protected]
wrote:

Can you mail it to me directly? (That does kind of bug me about
github.) Or is it too big?

Thanks,
Bryan

On Jul 21, 2015, at 3:47 PM, Rob MacLeod [email protected]
wrote:

Hi Byran,
Thanks, I can send you the file...but I cannot see how to attach a
file (other than an image) to this message. Do you know how to do this?
Thanks,
Rob

—
Reply to this email directly or view it on GitHub.

—
Reply to this email directly or view it on GitHub.

—
Reply to this email directly or view it on GitHub.

—
Reply to this email directly or view it on GitHub.

—
Reply to this email directly or view it on GitHub
#15 (comment).

rsmacleod · 2015-07-31T11:45:20Z

Hi Bryan

OK, I understand and hope you did not lose too much time on all this.

Can you give me a status report?

Thanks,
Rob

On Jul 31, 2015, at 00:09, bryanworthen [email protected] wrote:

Hi Rob,

Sorry for the delay. I had to reinstall my development environment, and I
couldn't get to that until today.

Bryan

On Wed, Jul 22, 2015 at 6:55 AM, Rob MacLeod [email protected]
wrote:

HI Bryan,

No problem!

Cheers,
Rob

On Jul 22, 2015, at 06:26 , bryanworthen [email protected] wrote:

Yes, thanks.

I should be done by Friday evening (I'm on a work trip that's taking nor
effort than expected).

Bryan

On Jul 21, 2015, at 7:32 PM, Rob MacLeod [email protected]
wrote:

HI Bryan,

DID you get the email I sent earlier with the file? It was to your
gmail address.

Cheers,
Rob

On Jul 21, 2015, at 18:25 , bryanworthen [email protected]
wrote:

Can you mail it to me directly? (That does kind of bug me about
github.) Or is it too big?

Thanks,
Bryan

On Jul 21, 2015, at 3:47 PM, Rob MacLeod [email protected]
wrote:

Hi Byran,
Thanks, I can send you the file...but I cannot see how to attach a
file (other than an image) to this message. Do you know how to do this?
Thanks,
Rob

—
Reply to this email directly or view it on GitHub.

—
Reply to this email directly or view it on GitHub.

—
Reply to this email directly or view it on GitHub.

—
Reply to this email directly or view it on GitHub.

—
Reply to this email directly or view it on GitHub
#15 (comment).

—
Reply to this email directly or view it on GitHub #15 (comment).

bryanworthen · 2015-07-31T18:33:55Z

All right, so I had to:

re-download Visual Studio - I got stuck having to use 2012, since 2010
isn't supported anymore.
download a new version of Qt that is supported by that version of Visual
Studio
upgrade the map3d code (just a little) to support Qt 5.

That only took a few hours, but it wasn't something I could do easily over
hotel internet.

Anyway, sorry agin.

So I finished the task this morning, and committed it. I will push a new
set of binaries to github this evening.

Thanks,
Bryan

On Fri, Jul 31, 2015 at 5:45 AM, Rob MacLeod [email protected]
wrote:

Hi Bryan

OK, I understand and hope you did not lose too much time on all this.

Can you give me a status report?

Thanks,
Rob

On Jul 31, 2015, at 00:09, bryanworthen [email protected]
wrote:

Hi Rob,

Sorry for the delay. I had to reinstall my development environment, and I
couldn't get to that until today.

Bryan

On Wed, Jul 22, 2015 at 6:55 AM, Rob MacLeod [email protected]
wrote:

HI Bryan,

No problem!

Cheers,
Rob

On Jul 22, 2015, at 06:26 , bryanworthen [email protected]
wrote:

Yes, thanks.

I should be done by Friday evening (I'm on a work trip that's taking
nor
effort than expected).

Bryan

On Jul 21, 2015, at 7:32 PM, Rob MacLeod <[email protected]

wrote:

HI Bryan,

DID you get the email I sent earlier with the file? It was to your
gmail address.

Cheers,
Rob

On Jul 21, 2015, at 18:25 , bryanworthen <[email protected]

wrote:

Can you mail it to me directly? (That does kind of bug me about
github.) Or is it too big?

Thanks,
Bryan

On Jul 21, 2015, at 3:47 PM, Rob MacLeod <
[email protected]>
wrote:

Hi Byran,
Thanks, I can send you the file...but I cannot see how to
attach a
file (other than an image) to this message. Do you know how to do this?
Thanks,
Rob

—
Reply to this email directly or view it on GitHub.

—
Reply to this email directly or view it on GitHub.

—
Reply to this email directly or view it on GitHub.

—
Reply to this email directly or view it on GitHub.

—
Reply to this email directly or view it on GitHub
<
https://github.com/SCIInstitute/map3d/issues/15#issuecomment-123710790>.

—
Reply to this email directly or view it on GitHub <
https://github.com/SCIInstitute/map3d/issues/15#issuecomment-126577925>.

—
Reply to this email directly or view it on GitHub
#15 (comment).

rsmacleod assigned bryanworthen Jul 20, 2015

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Cannot read zero-offset triangles #15

Cannot read zero-offset triangles #15

rsmacleod commented Jul 20, 2015

bryanworthen commented Jul 21, 2015

rsmacleod commented Jul 21, 2015

bryanworthen commented Jul 22, 2015

bryanworthen commented Jul 22, 2015

rsmacleod commented Jul 22, 2015

bryanworthen commented Jul 22, 2015

rsmacleod commented Jul 22, 2015

bryanworthen commented Jul 31, 2015

rsmacleod commented Jul 31, 2015

bryanworthen commented Jul 31, 2015

Cannot read zero-offset triangles #15

Cannot read zero-offset triangles #15

Comments

rsmacleod commented Jul 20, 2015

bryanworthen commented Jul 21, 2015

rsmacleod commented Jul 21, 2015

bryanworthen commented Jul 22, 2015

bryanworthen commented Jul 22, 2015

rsmacleod commented Jul 22, 2015

bryanworthen commented Jul 22, 2015

rsmacleod commented Jul 22, 2015

bryanworthen commented Jul 31, 2015

rsmacleod commented Jul 31, 2015

bryanworthen commented Jul 31, 2015