Skip to content

Latest commit

 

History

History
44 lines (40 loc) · 1.81 KB

MISP_VM installation.md

File metadata and controls

44 lines (40 loc) · 1.81 KB
Raw

Install (and configure) a MISP Virtual Machine

Download a VM (test only!) here: (Suggested: upgrade compatibility to at least Workstation 12.x, in order to have access to more functionalities). Then:

Increase your HD

  • Expand HD (via VMware)

  • Boot VM and increase partition this way:

  • sudo fdisk /dev/sda

  • p to list the partitions. Make note of the start cylinder of /dev/sda1 [e.g.: 2048] d to delete first the partition

  • n to create a new primary partition

  • p (default) for primary partition type

  • 1 (default) as partition number

  • [now check that the number of the start cylinder is the same as previously shown then press enter, otherwise type that number]

  • [For the last sector, you can leave the default number, tipically the last one possible]

  • Now the Linux partition is created -N -important: do NOT remove the LVM2_member signature, otherwise next boot will load the grub recovery utility in order to find the bootable partition

  • a to toggle the bootable flag on the new /dev/sda1

  • w to write on disk

  • sudo reboot

  • sudo resize2fs -f /dev/sda1 <-- this may not work, so:

  • sudo pvs to check PSize and PFree

  • sudo pvresize /dev/sda1 ----resize the physical volume

  • sudo lvextend -r -l +100%FREE /dev/mapper/misp--vg-root

  • sudo fdisk -l to check that everything is fine

Export OVF and deploy it on ESXi

Configure network interface

  • ifconfig so, if there's no network interface listed, add network interface:
  • dmesg | grep -i network to check the name of the interface [e.g.: eth0]

Add these lines in /etc/network/interfaces:

auto eth1
iface eth1 inet dhcp

---------restart networking (e.g.: sudo /etc/init.d/networking restart)

Update MISP

After updating via web GUI (or git), maybe also necessary:

root@host:/var/www/MISP# git submodule update --init --force